Filter
Showing 64–72 of 174 results
TECHNICAL SPECIFICATIONS
Material – SUS304
Size – 1500*1450*2250mm
Unlock time – 0.2s
Pass rate – 30p/m
Pass width – 650mm
Input voltage – 100V~240V
Driving voltage – 24V
Environment – -15~+55℃
Power – 30W
Input signal – Dry contact
FEATURES
• Stable and reliable mechanical locking device, precise movement and turntable combination structure with special technology;
• With two-way traffic function, the brake lever steering is divided into two-way and one-way;
• With the function of power-off and opening, in case of emergency, the cross shaft rotation shaft is switched from locked to free passage mode, and pedestrians can pass quickly to meet the requirements of the fire protection passage;
• After the pedestrian reads the valid card, if the system does not pass within the specified time, the system will automatically cancel the pedestrian’s access permission;
• Install a two-way arrow indicator to indicate the passing status, whether passing or not;
• There is a DIP switch on the control panel, which can adjust the pass delay time through an algorithm, and can also be adjusted to a memory mode, for example: swiping a valid card five times and passing five people;
• Anti-reverse device function prevents the rotating unit from rotating in the opposite direction to the original direction
Read more
TECHNICAL SPECIFICATIONS
Power Supply: 100V ~ 240V AC
Control Circuit: 24V DC
Power Consumption: 30W
Operating Temper range: -25°c ~ +70°c
Protection level (IP): > 44
MCBF : 5 Million Cycles
Humidity: 95%
Hydraulic damper: Adjustable
Solenoid: 24V DC 100%
Throughout: Person
Communication Interface: RS485 or TCP IP
passage width :< 650mm
Frequency: < 50Hz or 60Hz
Electro -magnetic drive: DC
Section Version: 120 degrees
No of arms: 3 arms
Dimensions: 1630 x 1500 x2310mm
Net weight: 220kg
FEATURES
Designed for secure operation wish aesthetics inland
Corrosion protected S/S frame
Minimal exposed hardware
Heavy Gauge materials ASTM Standard
Consists of rotor assembly, shield Assembly, barrier section, mechanism housing & ceiling plate
The barrier can be set to delay closing in 1 ~ 60s after a valid card reading
Single passage in the set direction
Bi-directional single passage
Free passage in the direction
Always free or locked
Read more
TECHNICAL SPECIFICATIONS
Power Supply: 100V ~ 240V AC
Control Circuit: 24V DC
Power Consumption: 30W
Operating Temper range: -25°c ~ +70°c
Protection level (IP): > 44
MCBF : 5 Million Cycles
Humidity: 95%
Hydraulic damper: Adjustable
Solenoid: 24V DC 100%
Throughout: Person
Communication Interface: RS485 or TCP IP
passage width :< 650mm
Frequency: < 50Hz or 60Hz
Electro -magnetic drive: DC
Section Version: 120 degrees
No of arms: 3 arms
Dimensions: 1630 x 1500 x 2310 mm
Net weight: 220kg
FEATURES
Designed for secure operation wish aesthetics inland
Corrosion protected S/S frame
Minimal exposed hardware
Heavy Gauge materials ASTM Standard
Consists of rotor assembly, shield Assembly, barrier section, mechanism housing & ceiling plate
The barrier can be set to delay closing in 1 ~ 60s after a valid card reading
Single passage in the set direction
Bi-directional single passage
Free passage in the direction
Always free or locked
Read more
TECHNICAL SPECIFICATIONS
Material – SUS304
Size – 2200*1500*2200mm
Unlock time – 0.2s
Pass rate – 30p/m
Pass width – 650mm
Input voltage – 100V~240V
Driving voltage – 24V
Environment – -15~+55℃
Power – 30W
Input signal – Dry contact
FEATURES
• Stable and reliable mechanical locking device, precise movement and turntable combination structure with special technology;
• With two-way traffic function, the brake lever steering is divided into two-way and one-way;
• With the function of power-off and opening, in case of emergency, the cross shaft rotation shaft is switched from locked to free passage mode, and pedestrians can pass quickly to meet the requirements of the fire protection passage;
• After the pedestrian reads the valid card, if the system does not pass within the specified time, the system will automatically cancel the pedestrian’s access permission;
• Install a two-way arrow indicator to indicate the passing status, whether passing or not;
• There is a DIP switch on the control panel, which can adjust the pass delay time through an algorithm, and can also be adjusted to a memory mode, for example: swiping a valid card five times and passing five people;
• Anti-reverse device function prevents the rotating unit from rotating in the opposite direction to the original direction
Read more
TECHNICAL SPECIFICATIONS
Frame :304 Stainless Steel
Rotation Direction : A. Bi-Directional B. In directional
Controller : Adopt micro-computer controller can be programmed according to customer controller can be used for other integration systems
Signal Source : 1. Dry contact 2. High-low-level signals
Roller working Power: AC220V+10%
Power Supply : AC220V+10%, DC24V3A+10%, DC12V3A+10%
Environment : Indoor/Out door
Temperture : -30°C to 80°C
Humidity :5% to 90%
Switching Time : Is
Traffic Speed : 25 person per Minute
Fault Status : Power-safe and Giving a free exit/entry path
MCBF : 5 Million Cycles
Frame Protection : Waterproof Seal
Card Reader Location : 4
Installation and maintenance portal : 1
Optional Feature : IC/ID reader, Barcode Reader, other R/W equipment, UPS, Infrared detector
Read more
TECHNICAL SPECIFICATIONS
Frame :304 Stainless Steel
Rotation Direction : A. Bi-Directional B. In directional
Controller : Adopt micro-computer controller can be programmed according to customer controller can be used for other integration systems
Signal Source : 1. Dry contact 2. High-low-level signals
Roller working Power: AC220V+10%
Power Supply : AC220V+10%, DC24V3A+10%, DC12V3A+10%
Environment : Indoor/Out door
Temperture : -30°C to 80°C
Humidity :5% to 90%
Switching Time : Is
Traffic Speed : 25 person per Minute
Fault Status : Power-safe and Giving a free exit/entry path
MCBF : 5 Million Cycles
Frame Protection : Waterproof Seal
Card Reader Location : 4
Installation and maintenance portal : 1
Optional Feature : IC/ID reader, Barcode Reader, other R/W equipment, UPS, Infrared detector
Read more
TECHNICAL SPECIFICATIONS
User Capacity: 2000
Fingerprints Capacity: 2000
Card Capacity: 2000
Transaction Storage: 100000
Push Data: Yes
Card Reader: Yes
Fingerprint sensor: 500 DPI Optical Sensor
FAR : <=0.0001% / FRR : <=1%
Identication Speed: <= 1sec
Algorithm Ver: 10
Display: 2.8” TFT Sceen
Keypad: 4 x 4 Keypad
LED Indicator: Green/Red
Schedule Bell/Speaker: Mini Speaker
Communication: TCP/IP, USB-host
Standard Features: Inbuilt Battery Backup,
Self Service Query
Status Switch, DST, T9 Input
POWER SUPPLY
Power Supply: 12V DC, 1.5 Amps
Operating Temprature: 0°C to 45°C
Operating Humidity: 20% – 80%
Dimension (in mm): 185 x 140 x 30
Access Control: Yes
Relay: 12V
Exit Readers: NO
Exit: NO TOUCH and PUSH BUTTON
Inbuilt Battery: yes
COMPATIBLE SOFTWARE & SDK
eTimeTracklite desktop & web
MAJOR APPLICATIONS
Time & Attendance , Canteen management, School attendance, Production Management, Gym & clubs
Read more
TECHNICAL SPECIFICATIONS
Fingerprints Capacity : 800
Card Capacity : 800
Transaction Storage : 80,000
Push Data : Yes
Card Reader : Yes
Card Reader: Yes
Fingerprint sensor : 500 DPI Optical Sensor
FAR : <=0.0001% / FRR : <=1%
Identication Speed: <= 1sec
Algorithm Ver: 10
LED Indicator: Green/Red
Schedule Bell/Speaker: Mini Speaker
Communication: TCP/IP, USB-host
Standard Features: Inbuilt Battery Backup,
Self Service Query,SSR Recorder,Automatic
Status Switch, DST, T9 Input
Power Supply: 12V DC, 1.5 Amps
Operating Temprature: 0°C to 45°C
Operating Humidity: 20% – 80%
Dimension : 185 x 140 x 30mm
Access Control – Relay : 12V
EXIT READERS
Support exit readers : Push Button
Dual Mode : Either SSR Mode or Software Mode
COMPATIBLE SOFTWARE & SDK
eTimeTracklite desktop, web & Cloud
MAJOR APPLICATIONS
Time & Attendance , Canteen management, School attendance, Production Management, Gym & clubs
Read more
STORAGE CAPACITY
Fingerprints Capacity : 3000
Card Capacity : 5000
Transaction Capacity : 100000
BIOMETRIC
CPU : 32 bit High End Microprocessor
Fingerprint sensor : 500 DPI Optical sensor
FAR : <=0.0001%
FRR : <=1%
Identification speed : <=0.5sec
Algorithm Ver : 9/10
AUDIO & VISUAL
Display : 2.8″ color TFT
Keypad : Yes
LED Indicator : Green/Red
Schedule Bell/Speaker : Mini Speaker
COMMUNICATION
Communication : TCP/IP,USB host
Push data : Standard
STANDARD FUNCTIONS
DLST, Self Service Query, Status Switch
POWER & ENVIRONMENT
Power Supply : DC 12V — 1.5A
Operating Temp : 0 °C – 45 °C
Operating Humidity : 20% – 80%
Battery : NO
Dimensions (in mm) : (L)183 x (W)80 x (H)42
ACCESS CONTROL
Wiegand : In & Out
Relay : 12 V relay for lock EM lock, Bolt Lock or Strike lock
Door Sensor : Yes
Anti Passback : Yes
Door Bell : Yes
EXIT READERS
Support exit readers : FR 1200/KR 500
OPTIONAL
Battery : No
Card Readers : Yes
Card Type : Mifare/HID Prox
COMPATIBILITY
Compatible with Multi Door controllers via weigand
External Speaker output available (Optional)
External Bulb output available (Optional)
COMPATIBLE SOFTWARE AND SDK
ETimeTrackLite desktop & web
SDK for desktop applications
Web based Device Manager/ePush server using Push data, Helps developers & integrators
Supports 3rd Party Payroll/HRMS/ERP and Other applications
MAJOR APPLICATIONS
Time & Attendance , Canteen management, School attedance, Production Management, Gym & clubs
Read more