BG180-BDC Automatic Boom Barrier with DC Brushless Motor
The BG180-BDC is an automatic boom barrier with a 24V DC brushless motor, designed to regulate vehicle entry and exit at parking facilities, offices, residential communities and commercial premises. Its brushless mechanism is designed for stable, low-noise operation.
The manufacturer lists boom configurations of 3 metres, 4 metres and 6 metres, with corresponding operating times of 1.5 seconds, 3 seconds and 6 seconds. The barrier supports reverse, auto-close and intelligent checking functions, along with connections for compatible loop detectors, radar sensors and photocells.
Key Features of the BG180-BDC Automatic Boom Barrier
Brushless motor operation, adjustable barrier speed, safety functions and integration options for vehicle access control installations.
24V DC Brushless Motor
Uses a 24V DC brushless motor drive designed for stable operation, low operating noise and long service life.
Multiple Boom Arm Options
Supports 3-metre, 4-metre and 6-metre boom configurations with different operating times.
Reverse and Auto-Close
Includes reverse, automatic closing and intelligent checking functions for compatible barrier installations.
Vehicle Detection Integration
Supports connections for compatible parking management systems, loop detectors, radar sensors and photocells.
Adjustable Operating Speed
Supports speed adjustment, soft start and soft stop. The manufacturer lists a fastest operating speed of 1.2 seconds.
Manual Operation During Power Failure
Allows manual operation during a power outage. Automatic operation using a backup battery is optional.
BG180-BDC Technical Specifications
Review the published motor, power supply, boom speeds, protection rating and environmental specifications.
| Product Model | BG180-BDC |
|---|---|
| Product Type | Automatic Boom Barrier with DC Brushless Motor |
| Working Voltage | 24V DC ±5% |
| Rated Power | 120W, 24V DC |
| Power Supply | 220V AC ±10%, 50/60Hz; 110V AC ±10%, 50/60Hz |
| Motor Type | DC Brushless Motor |
| Boom Length and Operating Speed | 6 metres: 6 seconds; 4 metres: 3 seconds; 3 metres: 1.5 seconds |
| Fastest Listed Operating Speed | 1.2 seconds |
| Speed Adjustment | Supported; soft start and soft stop |
| Safety Functions | Reverse, Auto-Close and Auto Intelligent Check |
| External Connections | Parking Management System, Loop Detector, Radar Sensor and Photocell |
| Optional Communication | RS485 |
| Backup Battery | Optional; enables automatic operation during power failure |
| Manual Operation | Supported during power failure |
| Protection Rating | IP54 |
| Environment Humidity | 10% to 90%, non-condensing |
| Working Temperature | -35°C to 70°C maximum |
| Cabinet Finish | Electrophoresis treatment followed by powder coating |
| Operating Mechanism | Brushless mechanism with hull limit switch, designed for stable and low-noise operation |
Note: Specifications are based on the manufacturer's published listing and may change without notice. Boom operating times depend on the selected arm configuration. Confirm the power supply, installation requirements and optional backup battery before ordering.
Frequently Asked Questions
Common questions about the BG180-BDC Automatic Boom Barrier.
What is the BG180-BDC?
The BG180-BDC is an automatic boom barrier with a 24V DC brushless motor, designed to control vehicle entry and exit at compatible facilities.
Which boom arm lengths are available?
The manufacturer lists 3-metre, 4-metre and 6-metre boom configurations, with different operating times.
How fast does the BG180-BDC operate?
The listed operating times are 1.5 seconds for a 3-metre arm, 3 seconds for a 4-metre arm and 6 seconds for a 6-metre arm. The manufacturer also lists a fastest operating speed of 1.2 seconds.
What motor does the BG180-BDC use?
It uses a 24V DC brushless motor rated at 120W.
Does the barrier support safety functions?
Yes. Reverse, auto-close and intelligent checking functions are listed by the manufacturer.
Can it connect to a radar sensor or loop detector?
Yes. The product listing includes connections for compatible parking management systems, loop detectors, radar sensors and photocells. RS485 is optional.
Can the BG180-BDC operate during a power failure?
Manual operation during power failure is supported. Automatic operation using a backup battery is optional.
How can I enquire about the BG180-BDC price?
Contact CDN Technologies for pricing, availability, boom arm options and help checking compatibility with your vehicle access control installation.
Get in Touch for Product Enquiry
Have questions about the BG180-BDC Automatic Boom Barrier? Contact CDN Technologies for pricing, availability and help with your boom barrier and vehicle access control requirements.